Advanced - Repotec RP-WR5441L User Manual

4.5.6.

Advanced

These settings are only for more technically advanced users who have a sufficient knowledge
about wireless LAN. These settings should not be changed unless you know what effect the
change will have on your AP
Authentications type: The default is set to "Auto", which allows "Open System" or
"Shared Key" authentication to be used. Select "Shared Key" if you only want to use
"Shared Key" authentication (the sender and recipient use a WEP key for authentication)
Beacon Interval: The interval time of this Wireless 802.11b/g/n 150Mbps Broadband
Router broadcast a beacon. Beacon is used to synchronize the wireless network. The valid
interval is 20-1000, the default is 100
RTS Threshold: You can set RTS Threshold value in this field, the valid range should be
256-2347 and default value is 2347. If a network packet is smaller than the preset RTS
threshold size, the RTS/CTS mechanism will not be enabled
Aggregation: You can accelerate the wireless transmission speed by enabling the
aggregation function. The default is
Fragmentation Threshold: It specifies the maximum size of packet during the
fragmentation of data to be transmitted
Transmission Rate: Transmit rate indicates the transmission speed of wireless LAN
access .The default setting is "Auto" and you can set this value between 1-54Mbps range
ShortGi: You can select "Enable" or "disable" for shortgi
Wireless 802.11b/g/n 150Mbps Broadband Router User Manual
Figure 4-30
＋
AMPDU AMSDU
42