Checking Connection With The Router - Repotec RP-WR5441L User Manual

3.2. Checking Connection with the Router

After configuring the TCP/IP protocol, use the ping command to verify if the computer
can communicate with the Router. To execute the ping command, open the DOS window and
Ping the IP address of the Wireless 802.11b/g/n 150Mbps Broadband Router at the DOS
prompt:
For Windows 98/Me: Start -> Run. Type command and click OK.
For Windows 2000/XP: Start -> Run. Type cmd and click OK.
At the DOS prompt, type the following command:
If the Command window returns something similar to the following:
C:\Documents and Settings\admin>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Wireless 802.11b/g/n 150Mbps Broadband Router User Manual
Figure 3-17
20