Appendix I: Advanced Nmea Setup - Garmin GPSMAP 168 Owner's Manual And Reference Manual

Appendix I
Advanced NMEA Setup
Advanced NMEA Setup Page
108
168 Manual Part 2.indd 108
NMEA Interface
If you are going to interface the GPSMAP 168 Sounder with another piece of equipment such as a
radar or autopilot the unit has to be set to output NMEA data. The NMEA data can be customized
to shorten the update time from the unit. If too many NMEA sentences are activated the unit may
take longer than 2 seconds to update.
Activating the NMEA Data:
1. With the GPSMAP 168 Sounder turned on, press the
Using the Arrow Keypad, select the 'COMM' tab.
2. Highlight the 'Serial Data Format' fi eld and press
3. Select 'NMEA IN/NMEA OUT' and press
Advanced NMEA Output Setup
The GPSMAP 168 Sounder NMEA data transmission can be customized to keep the output rate at
two seconds. If the unit is setup to output all of the available NMEA sentences, the output rate may
exceed two seconds. The 'Advanced NMEA Output Setup' page will allow you to turn On/Off the GPS
Status (GSA, GSV), Waypoint/Route (WPL, RTE) and the GARMIN Proprietary sentences. You can also
change the precision of the Lat/Lon Minutes.
Advanced NMEA Output Setup:
1. With NMEA In/NMEA Out selected, press the MENU key. Select NMEA Setup and press ENTER.
2. To turn a fi eld On/Off, place the highlight over that fi eld and press
ENTER
press again to accept the selection.
GPSMAP 168 Sounder NMEA Sentence Output (NMEA Version 2.30 compliant)
Always transmitted:
GPRMC, GPGGA, GPGLL, GPBOD, GPBWC, GPVTG, GPXTE, GPRMB
Switchable sentences:
GPGSA, GPGSV, GPWPL, GPRTE
GARMIN Proprietary:
PGRME, PGRMZ, PGRMM
MENU
key twice to display the Main Menu.
ENTER
.
ENTER
.
ENTER
. Make a selection and
11/18/2002, 3:38:21 PM