Garmin GPSMAP 168 Owner's Manual And Reference Manual page 77

Reference
Editing Routes
Highlight the route leg on which you wish to
insert a waypoint and press ENTER/MARK.
Drag the route leg to an existing waypoint
(shown), map item, or a blank spot on the
map to create a new route point.
66
168 Manual Part 2.indd 66
The GPSMAP 168 Sounder' s 'Edit on Map' mode also allows you to insert a new route waypoint
in any route leg using the map cursor.
To insert a new point between two existing route waypoints:
1. Use the ARROW KEYPAD to select the leg you want to insert the new waypoint in (the route line
will highlight and change to a dotted line when the leg is selected) and press ENTER/MARK.
2. Move the cursor to the new map position, existing waypoint, or map item (You will see 'ADD' below
the arrow and the route lines will move with the arrow), and press ENTER/MARK.
3. If you are not inserting an existing point, press ENTER/MARK to confi rm the new waypoint.
Insert/Add Waypoint— Allow you to insert a waypoint into the list of route points or add a point(s)
onto the end of the route.
To insert a point into the route or add a point to the end:
1. From either the Route Review or Active Route pages, use the ARROW KEYPAD to highlight the
point you wish to insert the new point before (to add a point to the end, highlight the blank fi eld
at the bottom of the list).
2. Press MENU, highlight 'Add Waypoint' or 'Insert Waypoint' and press ENTER/MARK.
3. From the 'Find' list, select a point to be inserted/added and press ENTER/MARK.
Remove Waypoint— Allows you to remove a point (waypoint or map item) from a route. This option
is available from both the Route Review and Active Route Pages.
To remove a point from a route:
1. From either the Route Review or Active Route pages, use the ARROW KEYPAD to highlight the
point to remove and press MENU.
2. Highlight 'Remove Waypoint' and press ENTER/MARK.
11/18/2002, 3:37:56 PM