Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
• Connecting the parking brake cord to lamp ground allows you to watch iPod/iPhone video/DVD video/AV
input when the parking brake is engaged.
• When the parking brake cord is not connected, the monitor will not show any video sources.
• If "AUDIO ONLY" appears on the screen just after turning on the ACC power of the car, release the parking
brake while confirming safety, and then engage the parking brake again.
Parking brake lamp
cord to battery
Parking brake
Electro-tap
Parking brake
signal cord
Parking brake cord (Grass-
green)
32
VX404
How to attach the electro-tap
1. Place the Parking brake cord at the stopper,
and fold it back in the direction of the arrow
2. Pass the Parking brake signal cord through,
and fold it back in the direction of the arrow.
Parking brake signal
cord
Parking brake signal
cord
Stopper
Parking brake cord
(Grass-green)