Table of Contents
Advertisement
SYMPTOM
OF TROUBLE
Bubble comes out when put
Soap-suds on welding point
If cut between capillary tube and
dryer, refrigerant comes out
intermittently clogged certain part
in cooling-cycle
Weak cooling
Door switch is not pressed
Defect motor F
Temperature-fuse is opened
Defrost-heater is opened
Defect switch bi-metal
Outlet voltage is not proper
No power
Defect fuse
Defect wire connection
Overflow the drain case
Frost is appeared around
Leakage to
suction pipe
foot or front
Cabinet is inclined cause of
unleveled install
Door inclined
CAUSE OF TROUBLE
14
REMEDY
Re-weld leak-point
Exchange clogged part
1. Exchange door switch
pressing part or door
assembly
2. Adjust foot cause of
Cabinet inclined
Replace defect motor
Replace temperature-fuse
Replace defrost-heater
Replace switch bi-metal
Explain
customer
refrigerator in proper voltage
Replace fuse
Reconnect
Empty the drain case
Recharge proper amount of
refrigerant
Use adjust feet in opposition to
former state
Adjust all hinges
to
use
Hide quick links:
Advertisement
Table of Contents
