Connecting Fireplace To Gas Supply - Desa Variable Manually-Controlled Models Owner's Operation And Installation Manual

INSTALLING
Continued
103281
Approved
Flexible
Gas Line
* Purchase the optional A.G.A. design-certified manual shutoff valve from your
dealer. See Accessories, page 34.

CONNECTING FIREPLACE TO GAS SUPPLY

Installation Items Needed
• 5/16" hex socket wrench or nut-driver
• Phillips screwdriver
• sealant (resistant to propane/LP gas, not provided)
1. Remove fireplace screen. Remove two screws that hold fireplace screen in
place for shipping. These screws are located near top of screen. Discard
screws. Lift fireplace screen up and pull out to remove.
2. Remove access door from rear or side of fireplace. See Product Identification,
page 4, for access door locations.
3. Remove screws that attach log base assembly to fireplace (see Figure 17).
Carefully lift up log base assembly and remove from fireplace (see Figure 17).
If adding the G8000 brick liner accessory, install it now. Follow instructions
Note:
in G8000 accessory kit.
Do not pick up log base assembly by burners. This could damage
burners. Only handle base by grates.
Figure 17 - Removing Log Base Assembly From Fireplace
A.G.A. Design-Certified Manual Shutoff Valve
With 1/8" NPT Tap*
3" Minimum
Figure 16 - Gas Connection
CAUTION
WARNING ICON G 001
From Gas Meter
(5" W.C. to 10.5" W.C.
Pressure)
Sediment
Trap
Tee Joint
Pipe Nipple
Cap
Continued
17