Desa Variable Manually-Controlled Models Owner's Operation And Installation Manual page 13

INSTALLING
Continued
103281
7. Break off nailing flanges (see Figure 10) with hammer or pliers.
Figure 10 - Location of Nailing Flanges
8. Place cardboard or other protective material on top of hearth base. Carefully
set fireplace on protective material, with back of fireplace inside mantel
opening.
9. Attach flexible gas line to fireplace gas regulator. See Connecting Fireplace to
Gas Supply, page 17.
10. Route blower electrical cord through side or rear access door of fireplace. Plug
electrical cord into electrical outlet.
11. Carefully insert fireplace into cabinet mantel. Be careful not to scratch or
damage hearth base, cabinet mantel, or any laminate trim on hearth base.
Remove protective material from top of hearth base and from front of fireplace
(if any). Note: You can secure fireplace to hearth or floor. Open lower louver.
Locate screw holes in bottom of base. Tighten wood screws through these
holes and into hearth or floor.
12. Check all gas connections for leaks. See Checking Gas Connections, page 18.
QQQQQ
QQQQQ
Figure 11 - Inserting Fireplace Into Cabinet Mantel
QQQ
QQQ
QQQ
QQQ
QQQ
Nailing Flanges
Continued
13