Uninstalling The Speedway Pci Card And Applications - BT Speedway ISDN PCI card Installation Manual

Internal isdn pci card for pcs
Table of Contents

Advertisement

You are now ready to connect to your ISP at 64Kbps.
Internet access at 128Kbps with Windows NT
These instructions assume the you have already created a connection to the
Internet over a single 64Kbps channel, as in the previous section. Follow the
instructions below to change your link to enable simultaneous connection of
both channels.
Open
1.
Control Panel
Open
2.
Network
Click on
3.
Services
Select
4.
Remote Access Service
Click on
5.
Properties
Click on
.
6.
Add
Select
7.
ISDN RAS(PPP over ISDN)
Click on
8.
Continue
Click on
9.
Close
Restart PC as requested.
10.
After the PC has rebooted -
Open
1.
Control Panel
Open
2.
Dial-Up Networking
Select service that you require to multilink from the Phone book entry list.
3.
Click on
4.
More
In the
tab select
5.
Basic
Click on
6.
Configure
Select both devices (check box)
7.
RAS (PPP over ISDN)
Make sure that your ISP telephone number is the same in both devices.
8.
Click on
and then click
9.
OK
You are now ready to connect to your ISP at up to 128Kbps.
3.6 Uninstalling the Speedway PCI Card
and Applications.
Before you uninstall the Speedway! software, you must first physically remove
the PCI card from your computer. This ensures that Windows does not try to
automatically re-install the device driver software via the 'plug and play'
system.
.
.
tab.
.
.
.
.
.
.
and select
Edit entry and modem properties
Multiple lines
.
.
again.
OK
.
in
Dial using list
ISDN Internet (PPP over ISDN) and ISDN
.
.
17

Advertisement

Table of Contents
loading

Table of Contents