Table of Contents
Advertisement
The setup information is displayed, click
4.
The driver is then entered in the Windows Registry database and will be
activated as soon as your PC is re-started. When requested if you wish to
re-start Windows click
After re-starting a new program group 'Speedway PCI' will have been added
5.
to your Windows Start Menu and a program group of the same name will
be seen on the Desktop.
You will find a 'Readme' and two applications in the Speedway PCI program
group.
You are now ready to install the Speedway! applications.
3.4 Installing the Speedway! Applications & the
CAPI Port Driver
You can quit the installation procedure at any time by clicking the
button.
If you have removed the CD from the machine after the previous
1.
installation section, re-insert the CD into your PC. The CD should
automatically load and you should see the 'BT Speedway ISDN PCI
Welcome' screen (Figure 4). If the CD does not automatically load use
Windows Explorer (or
the CD.
Click on the
2.
BT
On this screen, click on the Windows operating system version you are
3.
using. This will display the 'Installation Selection' view.
Click on the Speedway!
4.
On the next window, click on the
5.
The installation program will now start and the 'BT Speedway' screen is
displayed. It is best to follow the on-screen instructions that are now
displayed, but you may find it easier to refer to the instructions below:
Click
. Here you can specify the directory in which the applications
6.
Next
will be installed with the
C:\PROGRAM\FILES\SPEEDWAY!\
Click
. In the next window displayed, choose a program folder group
7.
Next
for your applications. The default is Speedway! Then click
.
Yes
-
Start
Run
icon to bring up the 'Windows System Selection' screen.
Applications Suite
Browse
.
Continue
Note
menu) to open the
icon.
icon.
Start Installation
button. The default is
.
Cancel
file on
intro.hlp
.
Next
13
Advertisement
Table of Contents
