Service And Warranty - Benassi MC 2300 REVERSO Instruction And Maintenance Manual

Thank you for selecting a BENASSI SPA machine.
This manual contains all the information and necessary data for the preservation and proper use of the machine.
The better you know your agricultural machine, the safer will be your work; therefore we suggest you to read carefully
and understand this "INSTRUCTIONS AND MAINTENANCE" manual before starting to work.
You will find important use notice relating to the use of the machine, which will help you to fully exploit its technical
characteristics. You will also find useful information concerning carefulness and maintenance, important for your safety, guide to
use and lasting preservation of your machine's value.
BENASSI SPA, in line with a policy of continuous technical improvement, reserves the right to change mechanical
parts, finishing and accessories. Data concerning dimensions, weights and performances are intended with DIN rules
allowances.
Pictures, descriptions and technical features are without obligation.
BENASSI SPA put at the customers' disposal its technical service to solve any problems concerning use and
maintenance of the machines and points out that they all have 12 months (a year) warranty after purchase as far as defective
material is concerned. In cases of difficulty please contact your retailer.
Please use BENASSI SPA products, original spare-parts and accessories; BENASSI SPA disclaims all responsibility for
any alteration or improper application.
BENASSI SPA shall not be liable for the application to its machines of accessories made by third persons, without previous
authorisation.
1) Machine specifications
2) Technical features of the engines mounted on the
different versions
3) Characteristics and drives captions
4) Dimensions and overall dimensions
5) Packing and transport
6) Accessories
7) Symbols and decalcomania's
8) Machine identification
9) Use of the machine
10) Control description
ENGINE 4 strokes – 5 HP / 5,5 HP.
Cone lined in oil bath.
CLUTCH
GEARBOX with gears in oil bath – 1 fwd. speed +1 rev. with wheel disengaging.
power mower version: 980 R.p.m. with sense of rotation Left.
P.T.O
engine driven cultivator version: 640 R.p.m. with sense of rotation Right.
HANDLEBAR adjustable in height and sideways – assembled on vibration dampers, 180° reversible.
tractor gummed 3.50.6 - 13.500.6 or iron.
WHEELS
TRACK from cm. 38,5 with wheels 3.50.6 at cm. 43 with wheels 13.500.6.
power mower version:
TOOLS
cutterbar cm 92 with eccentric motion, brush, snow turbine.
engine driven cultivator version:
cutter cm 40-50, plough, lister.
SPEED AT power mower version: km/hr 2,3
PEAK RPM
engine driven cultivator version: km/hr 1,5
2
SpA
INTRODUCTION
SERVICE AND WARRANTY
TABLE OF CONTENTS IN THIS MANUAL:
1 –TECHNICAL FEATURES OF THE MACHINE
11) Tools mounting and machine reversibility
12) Machine starting
13) Start of the work
14) End of the work
15) Use of the machine-Milling unit reversibility
16) Maintenance and machine lubrication
17) Garaging
18) Troubleshooting
19) Rules for a correct use of the machine
20) Accident-prevention rules
21) CE Declaration of the machine
MC 2300