BMW Motorrad R 1200GS Adventure Rider's Manual page 53

cator lamp then signals the rea-
son for the alarm for one minute.
The meanings of the flash codes
are as follows:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorized key
Flashes 4x: Alarm system is
disconnected from the motor-
cycle battery
Flashes 5x: Motion sensor 3
Deactivation
Emergency on/off switch (kill
switch) in normal operating po-
sition.
Switch on ignition.
Turn indicators light up once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm system is de-
activated.
Customize anti-theft
alarm system settings
Switch on ignition (
Repeat pressing button 1
briefly, until in the top line of
SETUP ENTER
the display 2
is shown.
Press and hold button 1 to
SETUP
start the menu.
42).
Press button 1 briefly to re-
spectively select the
menu item.
The top line of the display 2
DWA
shows
The adjusted value appears
in the bottom line of the dis-
play 3.
Press button 4 briefly to
change the adjusted value.
The following settings are avail-
able:
On
: Anti-theft alarm system is
activated respectively is acti-
vated automatically when the
ignition is switched off.
DWA
z
.
4
51