BMW Motorrad R 1200GS Adventure Rider's Manual page 33

Before adjusting the tire in-
flation pressure, observe
the information on temperature
compensation and on inflation
pressure adjustment in the chap-
ter "Technology in detail".
Tire inflation pressure is
outside approved range
with Tire Pressure Control
OE
(TPC/RDC)
The general warning lamp
flashes red.
The tire symbol with one or
two arrows appears. The
critical tire-inflation pressure also
flashes.
A tire inflation pressure out-
side the permissible toler-
ance result in poorer handling of
the motorcycle.
Adapt your style of riding
accordingly.
The up arrow indicates an in-
flation pressure problem on the
front wheel. The down arrow
indicates an inflation pressure
problem on the rear wheel.
Possible cause:
The measured tire inflation pres-
sure is outside the approved tol-
erance range.
Check tire for damage and
suitability for continued use.
If it is still possible to drive with
tire:
Correct tire inflation pressure at
the next opportunity.
Before adjusting the tire in-
flation pressure, observe
the information on temperature
compensation and on inflation
pressure adjustment in the chap-
ter "Technology in detail".
The RDC warning message
can be deactivated in the
off-road mode.
Have the tire checked for dam-
age at an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
If you are unsure about the tire's
suitability for continued riding:
Do not continue riding.
Contact roadside service.
Sensor defective or
system error
with Tire Pressure Control
OE
(TPC/RDC)
The general warning lamp
lights up yellow.
The tire symbol with one or
two arrows appears.
-- -- --
" " or " " is indicated.
Possible cause:
Wheels without installed TPC/
RDC sensors are mounted.
Retrofit wheel set with TPC/
RDC sensors.
3
31
z