Product Safety; Electromagnetic Compatibility (Emc); Manufacturer’S Declaration Of Conformance; Unpacking - Baxall DVS14 Installation And Operating Manual

DVS Series
• Please follow these instructions as you install the equipment and keep them for
future use. If you have any problems, contact Baxall Limited.
• Installation is only to be carried out by competent, qualified and experienced
personnel. Wire in accordance with the country of installation’s National Wiring
regulations. Failure to do so can result in death or injury by electric shock.
• The equipment supplied with this manual is designed for use in a general purpose
CCTV installation and has no other function.
• Before undertaking any installation or maintenance, the mains supply must be
disconnected.
• This product should only be used with the supplied +12V DC power supply (Baxall
Reference PSU11 or PSU14).
• Do not exceed the voltage and temperature limits given in the specifications.
• Only use your DVS Series Desktop Video Switcher in a clean, dry, dust-free
environment.
• Before cleaning this equipment, isolate the unit. Use only a dry, lint-free cloth. Do
not use cleaning fluids or solvents.
CAUTION
• This product is intended for use in general purpose CCTV applications in a
residential, commercial or light industrial EMC environment. Refer to Baxall
Limited before using the product is medical and/or intrinsically safe applications
or in an industrial EMC environment.
• This product must be installed in accordance with good installation practice for
EMC to enable the product to function as intended and to prevent EMC problems.
A “Declaration of Conformity” in accordance with the following EU standards has been
made and is on file at Baxall Limited, Stockport, SK6 2S, England.
The manufacturer declares that the product supplied with this document is compliant with
the provisions of the EMC Directive 89/336 EEC, the Low Voltage Directive LVD 73/23
EEC, the CE Marking Directive 93/68 EEC and all associated amendments.
Keep your packaging for use if the product is to be stored for an extended period or needs
to be returned for any reason. The packaging should contain:
• A DVS Series Desktop Video Switcher (DVS14, DVS18, DVS24A, or DVS28A)
• A mains-socket mounting +12V DC power supply (class 2)
• 15-way alarm connector plug and cover (with DVS24A and DVS28A only)
• These instructions
Check the product code on the serial number label. If you have an incorrect item or it is
damaged then inform the suppliers and carriers immediately. If this is the case then do not
attempt to use the equipment.
4
Installation and Operating Manual

ELECTROMAGNETIC COMPATIBILITY (EMC)

MANUFACTURER’S DECLARATION OF CONFORMANCE

PRODUCT SAFETY

UNPACKING