Titles Sub-Menu - Baxall DVS14 Installation And Operating Manual

Installation and Operating Manual
The Titles sub-menu is used to edit the title for each camera input that is connected to the
switcher. The screen position of each title can also be adjusted:
The Titles sub-menu has a numbered field for each camera input, and each of these fields
indicates the current title for that camera input
To alter a camera title:
1. Use the and
will be selected.
2. Using the and
changed.
3. Press the OK button. The Letter Selection screen is displayed.
4. Using the , ,
highlight the required character.
5. Press the OK button to select it.
6. Repeat steps 2-5 until the required title has been entered. The maximum title length is
12 characters.
7. When the required title has been entered, use the
left of the title. Press the
8. Using the , ,
9. Press the OK button to confirm the title position.
10. If required, use the
move the cursor to EXIT and press the OK button.
1
2
3
4
5
6
7
8
EXIT
Figure 11 - Titles Sub-Menu
(For the DVS18 and DVS28A)
buttons to highlight the required camera. The first character of the title
buttons, highlight the character in the camera title that is to be
and buttons, navigate through the 256 characters available and
button again to open the Title Position screen.
and buttons move the camera title to the required position.
and buttons to select another title to edit. To leave the menu,
TITLES
RECEPTION
STOREROOM
CAR PARK
CAMERA 4
CAMERA 5
CAMERA 6
CAMERA 7
CAMERA 8
button to move the cursor to the far
DVS Series

TITLES SUB-MENU

15