The On-Screen Menu System - Baxall DVS14 Installation And Operating Manual

Installation and Operating Manual
The DVS Series Desktop Video Switchers utilise an on-screen menu system to facilitate
setup and adjustment.
To enter the menu system, hold down the Number 1 and Auto buttons together until a
menu appears on the main monitor. Once the menu system has been accessed, the user
can navigate using the switcher keyboard:
A typical menu screen is shown below. The currently selected item is highlighted by a box
(known as the ‘cursor’) which can be moved up and down using the
and buttons are then used to change the selected parameter for that menu item. A
menu item with no parameters indicates that a sub-menu exists. To reveal the sub-menu,
highlight the menu item and press the OK button.
Highlighting EXIT and pressing the OK button will return to the previous menu level.
Currently selected
menu item
Move up or down
Version Number
Note
If no buttons are pressed for a period of 60 seconds, the switcher will exit the menu system.
Button
Camera Input 1
Camera Input 2
Camera Input 3
Camera Input 4
Auto
SETUP
KEY LOCK
TITLES
DWELL
DEFAULTS
ALARMS
EXIT
Ver x.x
Figure 9 - A Typical Menu Screen

THE ON-SCREEN MENU SYSTEM

Use in Menu System
OK
Currently selected
parameter
Change selected parameter
OFF
No parameters,
indicates submenu
DVS Series
and buttons. The
13