For Safety - Baxall DVS24 Installation And Operating Instructions Manual

For Safety

Please follow these instructions as you install your DVS2 and
have them available during the life-time of the DVS2. If you have
any problems contact your supplier or telephone Baxall's
Technical Support Department on +44 (0)161 406 6611.
WARNING: INSTALLATION IS ONLY TO BE CARRIED OUT BY
SUITABLY QUALIFIED AND EXPERIENCED
PERSONNEL
WARNING: ONLY USE THE DVS2 WITH THE CLASS 2 POWER
SUPPLY PROVIDED AND DO NOT ATTEMPT TO USE
THE POWER SUPPLY FOR ANY OTHER PURPOSE
The DVS2 is designed for use in general purpose CCTV
applications and must not be used for intrinsically safe or medical
applications.
Do not exceed the voltage and temperature limits given in the
specifications. Only use the DVS2 in a clean, dry, dust-free
environment.
Unpacking
Keep your packaging for use if your DVS2 is stored for a time or
needs to be returned for whatever reason. The packaging should
contain:-
The switcher, either:-
»
A mains-socket mounting +12V DC power supply (class 2)
»
These instructions
»
If any of the items are missing or damaged then inform the
suppliers and carriers immediately, and do not attempt to use
your DVS2.
English
the DVS24 with 6 keys,
or the DVS28 with 10 keys.
Page 3