D-Link DFL-1660 User Manual page 76

2.4.2. SNMP Monitoring
Chapter 2. Management and Maintenance
4. Click OK
Should it be necessary to enable SNMP Before Rules (which is enabled by default) then the setting can be found
in System > Remote Management > Advanced Settings.
SNMP Advanced Settings
The following SNMP advanced settings can be found under the Remote Management section in
the Web Interface. They can also be set through the CLI.
SNMP Before RulesLimit
Enable SNMP traffic to the firewall regardless of configured IP Rules.
Default: Enabled
SNMP Request Limit
Maximum number of SNMP requests that will be processed each second by NetDefendOS. Should
SNMP requests exceed this rate then the excess requests will be ignored by NetDefendOS.
Default: 100
System Contact
The contact person for the managed node.
Default: N/A
System Name
The name for the managed node.
Default: N/A
System Location
The physical location of the node.
Default: N/A
Interface Description (SNMP)
What to display in the SNMP MIB-II ifDescr variables.
Default: Name
Interface Alias
What to display in the SNMP ifMIB ifAlias variables.
76