4.7.3. Transparent Mode Scenarios
Example 4.20. Setting up Transparent Mode for Scenario 1
Web Interface
Configure the interfaces:
1.
Go to: Interfaces > Ethernet > Edit (wan)
2.
Now enter:
•
IP Address: 10.0.0.1
•
Network: 10.0.0.0/24
•
Default Gateway: 10.0.0.1
•
Transparent Mode: Enable
3.
Click OK
4.
Go to: Interfaces > Ethernet > Edit (lan)
5.
Now enter:
•
IP Address: 10.0.0.2
•
Network: 10.0.0.0/24
•
Transparent Mode: Enable
6.
Click OK
Configure the rules:
1.
Go to: Rules > IP Rules > Add > IPRule
2.
Now enter:
•
Name: HTTPAllow
•
Action: Allow
•
Service: http
Figure 4.21. Transparent Mode Scenario 1
247
Chapter 4. Routing