Operation - King-Dome 9702 Installation And Operating Instructions Manual

Automatic satellite system
Hide thumbs Also See for 9702:
Table of Contents

Advertisement

IMPORTANT! There must be a clear "line of sight" to the southern sky. Mountains, buildings, trees,
telephone poles, etc. can all block the satellite signal from reaching the dish.
The distance driven since last preforming a search may affect how long it takes for the
King-Dome to find the satellite.
Satellite TV and receiver technology are constantly changing. If you experience difficulty
go to www.kingcontrols.com or contact the King Controls Service Department at
(800) 982-9920.
1. Turn on TV and Receiver. "Searching for Satellite" or similar will appear on TV screen.
2. On King-Dome controller, press and hold
ON/SEARCH for 3 FULL SECONDS.
Power light turns steady GREEN.
STATUS LIGHT
a) flashes a variety of colors
for about one minute
b) RED-flashing
c) GREEN-flashing (may start
flashing RED again)
d) GREEN-steady
3. Can you view your desired programming?
Note: Receiver may require 2 minutes to
download program information.
YES: Turn King-Dome off and enjoy.
IMPORTANT! Do not turn off the
NO: Press the ON/SEARCH button for one
second to continue search. Repeat
step until you are locked onto the
correct satellite.
Page 12
SECTION 4
SYSTEM STATUS
unit performs
self-diagnostic
search in progress
potential satellite
found
satellite found
controller until you have
found your desired
satellite and programming.

OPERATION

Hand Held
Controller
Wall Mount
Controller

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9702-lp

Table of Contents