Programming Transmitters To The Vehicle; Battery Replacement - Cadillac 2010 Escalade EXT Owner's Manual

Programming Transmitters to the
Vehicle
Only RKE transmitters programmed to this vehicle will
work. If a transmitter is lost or stolen, a replacement
can be purchased and programmed through your
dealer/retailer. When the replacement transmitter is
programmed to this vehicle, all remaining transmitters
must also be reprogrammed. Any lost or stolen
transmitters will no longer work once the new
transmitter is programmed. Each vehicle can have
up to eight transmitters programmed to it. See Relearn
Remote Key under DIC Operation and Displays on
page 4 40 for instructions on how to match RKE
transmitters to your vehicle.

Battery Replacement

Replace the battery if the REPLACE BATTERY
IN REMOTE KEY message displays in the DIC.
See REPLACE BATTERY IN REMOTE KEY under
DIC Warnings and Messages on page 4 48 for
additional information.
Notice: When replacing the battery, do not touch
any of the circuitry on the transmitter. Static from
your body could damage the transmitter.
3-6
Ofrecido por www.electromanuales.com
To replace the battery:
1. Separate the transmitter with a flat, thin object
inserted into the notch, located above the
metal base.
2. Remove the old battery. Do not use a metal object.
3. Insert the new battery, positive side facing up.
Replace with a CR2032 or equivalent battery.
4. Snap the transmitter back together.