Battery Replacement; Programming Transmitters To The Vehicle - Cadillac 2010 Escalade Owner's Manual

The vehicle comes with two transmitters. Each
transmitter will have a number on top of it, 1 or 2 .
These numbers correspond to the driver of the vehicle.
For example, the memory seat position for driver 1 will
be recalled when using the transmitter labeled 1 ,
if enabled through the DIC. See Memory Features on
page 2 6 and DIC Vehicle Customization on
page 4 57 for more information.
Programming Transmitters to the
Vehicle
Only RKE transmitters programmed to this vehicle
will work. If a transmitter is lost or stolen, a replacement
can be purchased and programmed through your
dealer/retailer. When the replacement transmitter is
programmed to this vehicle, all remaining transmitters
must also be reprogrammed. Any lost or stolen
transmitters will no longer work once the new
transmitter is programmed. Each vehicle can have
up to eight transmitters programmed to it. See Relearn
Remote Key under DIC Operation and Displays on
page 4 41 for instructions on how to match
RKE transmitters to the vehicle.
3-6

Battery Replacement

Replace the battery if the REPLACE BATTERY
IN REMOTE KEY message displays in the DIC.
See REPLACE BATTERY IN REMOTE KEY under
DIC Warnings and Messages on page 4 48 for
additional information.
When replacing the battery, do not touch
any of the circuitry on the transmitter. Static from
your body could damage the transmitter.