Battery Replacement; Programming Transmitters To The Vehicle - Cadillac 2010 Escalade Owner's Manual

The vehicle comes with two transmitters. Each
transmitter will have a number on top of it, 1 or 2 .
These numbers correspond to the driver of the vehicle.
For example, the memory seat position for driver 1 will
be recalled when using the transmitter labeled 1 ,
if enabled through the DIC. See Memory Features on
page 2 6 and DIC Vehicle Customization on
page 4 58 for more information.
Programming Transmitters to the
Vehicle
Only RKE transmitters programmed to this vehicle will
work. If a transmitter is lost or stolen, a replacement can
be purchased and programmed through your dealer.
When the replacement transmitter is programmed to
this vehicle, all remaining transmitters must also be
reprogrammed. Any lost or stolen transmitters will no
longer work once the new transmitter is programmed.
Each vehicle can have up to eight transmitters
programmed to it. See Relearn Remote Key under
DIC Operation and Displays on page 4 42 for
instructions on how to match RKE transmitters to the
vehicle.
3-6

Battery Replacement

Replace the battery if the REPLACE BATTERY IN
REMOTE KEY message displays in the DIC. See
REPLACE BATTERY IN REMOTE KEY under DIC
Warnings and Messages on page 4 49 for additional
information.
When replacing the battery, do not touch
any of the circuitry on the transmitter. Static from
your body could damage the transmitter.