Creative Sound Blaster X-Fi Installation Manual page 5

6. Connect the CD audio cable disconnected in step 5 to the AUX_IN (1) or CD_IN (2) connector on
the Sound Blaster card.
CAUTION:
card.
Figure 1
Figure 2
7. If you ship your workstation, install a hold down on the card. See
on page 6
8. Close the chassis side cover.
9. Connect the AC power, turn on the computer, and wait for the system to boot. If the New Hardware
Found wizard appears, select Cancel.
10. Insert the Installation and Application CD into the CD-ROM drive.
11. When the installation software starts, follow the onscreen instructions to install the driver and
applications for the sound card. Restart the system when prompted to do so.
ENWW
Do not connect the CD audio cable to the VIDEO_IN connector on the Sound Blaster
Sound Blaster X-Fi XtremeMusic card
Sound Blaster X-Fi XtremeGamer card
for details.
Shipping your HP workstation
Step 2—Installing the card and software 5