Audio Adjustments - Pioneer DEH-X5600BT Operation Manual

Section
02 Using this unit
Pausing playback
1 Press 4/PAUSE to pause or resume.
Enhancing compressed audio and restoring rich
sound (sound retriever)
Only for DEH-4600BT
1 Press 3/S.Rtrv to cycle between:
1—2—OFF (off)
1 is effective for low compression rates, and 2 is
effective for high compression rates.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
PLAY (play)
1 Press M.C. to start playback.
STOP (stop)
1 Press M.C. to stop the playback.
S.RTRV (sound retriever)
1 Press M.C. to select the desired setting.
For details, refer to Enhancing compressed audio
and restoring rich sound (sound retriever) on page
18.

Audio adjustments

1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
Once selected, the following audio functions
can be adjusted.
! FADER is not available when
SUB.W/SUB.W is selected in
SP-P/O MODE. For details, refer to
18
En
SP-P/O MODE (rear output and preout set-
ting) on page 23.
! SUB.W and SUB.W CTRL are not available
when REAR/REAR is selected in
SP-P/O MODE. For details, refer to
SP-P/O MODE (rear output and preout set-
ting) on page 23.
! SUB.W CTRL is not available when SUB.W
is selected in OFF. For details, refer to
SUB.W (subwoofer on/off setting) on page
19.
! SLA is not available when FM is selected as
the source.
FADER (fader adjustment)
1 Press M.C. to display the setting mode.
2 Turn M.C. to adjust the front/rear speaker bal-
ance.
BALANCE (balance adjustment)
1 Press M.C. to display the setting mode.
2 Turn M.C. to adjust the left/right speaker balance.
EQ SETTING (equalizer recall)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the equalizer.
POWERFUL—NATURAL—VOCAL—CUSTOM1
—CUSTOM2—FLAT—SUPER BASS
The equalizer band and equalizer level can be cus-
tomized when CUSTOM1 or CUSTOM2 is se-
lected.
If selecting CUSTOM1 or CUSTOM2, complete
the procedures outlined below. If selecting other
options, press M.C. to return to the previous dis-
play.
! CUSTOM1 can be set separately for each
source. However, each of the below combina-
tions are set to the same setting automati-
cally.
! USB, iPod and APP (iPhone)
! BT AUDIO and APP (smartphone)
! CUSTOM2 is a shared setting used in com-
mon for all sources.
3 Press M.C. to display the setting mode.
4 Press M.C. to cycle between the following:
Equalizer band—Equalizer level
5 Turn M.C. to select the desired setting.
Equalizer band: 80HZ—250HZ—800HZ—2.5KHZ
—8KHZ
Equalizer level: +6 to –6