Table of Contents
Advertisement
Section
02
Using this unit
Adjusting the other party's listening volume
1 Press c or d while talking on the phone.
! When private mode is on, this function is not
available.
Turning private mode on or off
1 Press BAND/
Note
If private mode is selected on the cellular phone,
hands-free phoning may not be available.
Storing and recalling phone numbers
1
To store: Press and hold down one of
the preset tuning buttons (1/
The functions below can be used to store
phone numbers to the memory. For details,
refer to Phone menu operation on page 16.
! MISSED (missed call history)
! DIALLED (dialed call history)
! RECEIVED (received call history)
! PHONE BOOK (phone book)
2
To recall: Press one of the preset tuning
buttons (1/
to 6/
3
Press M.C. to make a call.
Switching the display
Selecting the desired text information
You can change the display during a call.
1 Press DISP to cycle between the following:
! Call time
! Name of other party
! Number of other party
Using voice recognition
This feature can be used on an iPhone
equipped with voice recognition that is con-
nected by Bluetooth.
1
Press and hold M.C. to switch to voice
recognition mode.
14
En
while talking on the phone.
to 6/
).
2
Press M.C. and then talk into the micro-
phone to input voice commands.
To end voice recognition mode, press BAND/
.
Notes
! For details on voice recognition features,
check the manual for your iPhone.
! In order for your voice commands to be recog-
nized and interpreted correctly, ensure that
conditions are suitable for recognition.
! Please note that wind blowing through the ve-
hicle windows and noise coming from outside
the vehicle can interfere with voice command
).
operation.
! For optimum pick-up, the microphone should
be placed directly in front of the driver at a sui-
table distance.
! Speaking too soon after the start of the com-
mand may cause voice recognition to fail.
! Speak slowly, deliberately, and clearly.
Connection menu operation
Important
Connected devices may not work properly if more
than one Bluetooth device is connected at a time
(e.g. a phone and a separate audio player are
connected simultaneously).
1
Press and hold
nection menu.
# You cannot perform this step during a call.
2
Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
to display the con-
Hide quick links:
Advertisement
Table of Contents
