Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
PACKAGE GAS ELECTRIC
FEATURING EARTH-FRIENDLY R-410A REFRIGERANT
RRNL- 13 SEER (2-5 TONS)
RRPL- 14 SEER (2-5 TONS)
RRRL- UP TO 16 SEER (2-5 TONS)
Seasonal Energy Efficiency Ratio (SEER)
RRNL
RRPL
13.0
14.0
—
10.6
Uses least energy
Annual Fuel Utilization Efficiency -
THIS MODEL
80.0%
MID
78%
82%
88%
ISO 9001:2000
RRRL
16.0
©
16.05
AFUE
HIGH
97%
(14 SEER &
ABOVE)
U.L. recognized fuel gas and CO (carbon monoxide) detectors are recommended in all
applications, and their installation should be in accordance with the manufacturer's
recommendations and/or local laws, rules, regulations, or customs.
r e f r i g e r a n t
92-21916-30-04
SUPERSEDES 92-21916-30-03
Advertisement
Table of Contents
Need help?
Do you have a question about the RRNL and is the answer not in the manual?
Questions and answers
What is the size of the start capacitor?
The size of the start capacitor for Rheem RRNL is 88-106 microfarads (uF) and 330 volts (VAC). It has a diameter of 1.813 inches and a length of 3.375 inches.
This answer is automatically generated
Where is the start capacitor located? I can't find it on any of the diagrams.
The context does not specify the exact physical location of the start capacitor in a Rheem RRNL unit. However, it indicates that a failed start or run capacitor (in single-phase systems) can be a cause of the compressor not running. Start capacitors are typically located in the control box or electrical panel of the unit.
Therefore, the start capacitor is likely located inside the control box of the Rheem RRNL unit.
This answer is automatically generated
Please confrm the minimum circcuit ampacity and FLA and RLA calues for this unit
The Rheem RRNL unit has the following electrical values:
- Minimum Circuit Ampacity: 26/26 amps for models B048CK06, B048CK08, B048CK10; 36/36 amps for models B048JK06, B048JK08, B048JK10
- FLA (Full Load Amps): 4.1 amps
- RLA (Rated Load Amps): 13.7/13.7 amps for B048CK models; 21.8/21.8 amps for B048JK models
This answer is automatically generated
What is the part that shuts down Rheem 5 ton 14 SEER Classic HVAC AC specific unit when it trips or overloads? My Technician has bypassed it in the interim and Rheem support was not helpful in identifying the part name. Trip Alert or Trip Overload???