Pioneer DV-533 Operating Instructions Manual page 37

When [Other] is selected
When you want to select one of the 136 languages as
the main audio language, follow the steps below when
the following screen appears.
A lao~~a~~ code list can be found on page 58.
1
Use the cursor buttons to select [Other]
and press ENTER.
The language selection screen appears.
List of Language Code IO-21
h
en: English
I HBHH
2 Use the cursor buttons (4)) to select
either "List of Languages" or "Code".
.II,x",.Ix - ".." b
3 If you select "List of Languages", use the
cursor buttons (A./V) to select the
language.
For languages which are only shown as a code,
please refer to 'Language Code List'on
page
58
List of Languages
A
If you select "Code", use the cursor
buttons (A/V) to input the numbers of the
input code.
Use the cursor buttons (4)) to change the
position of the cursor. You can also use the
number buttons to enter the code.
Code (O-2)
j
4 Press ENTER to set the new language.
To exit the screen without making any changes,
press RETURN.
,, ,,_ ,*
Setting Auto Language to control
subtitle and audio language based
When the Auto Language function is used, foreign
movies are shown with the original audio soundtrack and
subtitles in the language selected in the [Subtitle
Language] menu option. Domestic films are shown with
the original audio soundtrack and no subtitles. (This
setting may not be effective with all DVD discs.)
Make changes to the [Auto Language] setting in the
Setup screen Language menu.
You cannot make this setting s,Gth a disc playing.
The Auto
Language
function operates only when this
functm- IS
set to
[On],
and the language set for the
[Audio
Language] and [Subtitle Language] settings IS the same
I en: Enalish
I
37
En