Pioneer DV-533 Operating Instructions Manual page 26

Audio DRC stands for Audio Dynamic Range
Compression. When Audio DRC is on, soft sounds such
as dialog can be heard more clearly without making loud
sounds even louder. When Audio DRC is set to [Off],
there is no effect on the audio source.
Make changes to the [Audio DRCI setting in the Setup
screen Audio 1 menu.
Notes
l
Audro DRC is only effective with Dolby Digrtal audio
sources.
l
If you have set the player to convert Dolby Digital audio to
PCM, also make sure that
you
set the
[Digital Out1
to
[On]
to hear the Audio DRC effect.
l
The effect of Audio DRC depends on your speakers and
AV amplifier settings.
This player is capable of digital audio output for Dolby
Digital, DTS, MPEG, and signals with a sampling rate of
96 kHz. Make settings in the Setup screen Audio 1
menu to reflect the capabilities of the components that
you have made digital connections to.
Notes
l
If you have already completed the Setup Navigator screen
operations, the settings on thus page have already been
set by the player.
l
If you have made only stereo line connections (analog)
using the supplied audio cord, it is not necessary to make
any changes in this menu.
J
Dolby Digital Out
This player is capable of outputting the Dolby Digital
surround sound audio signal. When the player is
connected to an AV component that has a built-in Dolby
Digital decoder, select [Dolby Digital]. This player can
also convert the Dolby Digital signal to a digital Linear
PCM signal, the same digital signal output from a CD.
Select [Dolby Digital ) PCMI when you have made
connections to an amplifier or receiver with a Dolby Pro
l.ogic decader or a TX&al Ar~log Converter KX4C).
Dolby DIgital oufp~t mode
26
En