JVC KT-SR1000 Instructions Manual page 9

4
Slide JVC PnP all the way into the cradle so
.
that the connector at the bottom of the unit
makes proper contact in the cradle.
5
Press the (POWER) button to turn on your
JVC PnP.
• If your JVC PnP has been properly connected
and the antenna is receiving the SIRIUS signal,
you will hear audio.
• If your JVC PnP has not been properly
connected, "Antenna Error" will appear on the
display of your JVC PnP.
Re-orient the antenna until you hear audio (see
"8 Antenna Aiming Options" on page 27).
– Make sure your car is not in garage, or
somewhere the satellite signal could be
blocked.
Running the Antenna Cable
Before routing the antenna cable, confirm that the
antenna is mounted in a good location.
1
Turn off your JVC PnP then remove it from the
cradle.
2
Unplug the cigarette lighter adapter from the
cigarette lighter and the antenna from the
cradle.
9