American Standard GRWF130A94A0A Installation Manual page 31

8. Remove the cable ties to isolate and remove the
capillary tube of the existing auto-reset water tempe-
rature limit switch. See Figure 39.
Figure 39
INSTALLING THE NEW MANUAL-RESET WATER
TEMPERATURE LIMIT
1. Remove the cover from the reset button on the
new manual reset water temperature limit switch by
turning counter clockwise. See Figure 40.
2. In a similar manner, remove the locking nut from
the new manual reset water temperature limit. See
Figure 41.
3. Insert the manual reset push button of the water
temperature limit through the hole in the control
panel. See Figure 42.
Figure 40
Figure 42
Figure 41
18-CG02D1-4
31