Optional Manual Reset Water Temperature Limit Installation - American Standard GRWF130A94A0A Installation Manual

3.12 Installation Instructions for repla-
cing the Factory Installed Automatic-
reset Water Temperature Limit with the
Optional Manual Reset Water Tempera-
ture Limit Accessory
Reset Button
Cover
Manual Reset
Water Temperature
Limit Switch
REMOVING THE EXISTING AUTO-RESET WATER
TEMPERATURE LIMIT
▲
!
ELECTRICAL HAZARD
SHUT OFF POWER TO THE BOILER BEFORE
BEGINNING THIS INSTALLATION.
FAILURE TO FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY, DEATH, OR PRO-
PERTY DAMAGE.
Capillary
Tube
Sensing
Bulb
Figure 30
WARNING
Steps to remove the existing auto-reset water tempe-
rature limit switch.
1. Open the control panel and locate the existing
auto-reset water temperature limit. See Figures 31
and 32.
Figure 31
2. Remove the existing auto-reset water temperature
limit and discard the screws. See Figure 33.
Figure 33
Figure 32
18-CG02D1-4
29