DeLonghi PYROLYTIC OVENS Installation And Use Manual page 18

SETTING THE COOKING (only for the cooking functions)
Way 2: SETTING THE COOKING TEMPERATURE WITH THE
PROGRAMMER
°C
4
P P
2a
18
Function
selector knob
The temperature set is shown on the electronic programmer
display and can be varied, with 5°C intervals, by turning the
potentiometer knob.
During the cooking the oven temperature is measured by a
sensor inside the cavity and is shown on the programmer dis-
play.
1.
SELECTING THE COOKING FUNCTION
Turn the selector knob to the cooking function
required
The pre-set temperature appears on the programmer dis-
play.
elements start cooking immediately.
2.
SETTING THE COOKING TEMPERATURE
The temperature can be changed when °C is flashing on
the display
C
2a. If °
2b. Press key 6 to increase the temperature or key 5 to
5 6
reduce it.
The maximum temperature which can be set is 250°C
2b
while the minimum temperature is 50°C.
Note: When
play indicates the oven cavity temperature.
Caution: If a temperature below the minimum value (50°C)
is set the system switches off automatically and
appears.
In this case repeat the procedure from point 2.
3.
SWITCHING OFF
Turn the selector knob to position
The programmer display shows the time.
P
A
U
T
O
Programmer
°C
flashes on the display for 3 seconds. The heating
is not flashing press key 4 of the programmer.
°C
becomes steady the value shown on the dis-
Fig. 3.4
OFF
0
(oven OFF).