Technical Support (Faq) - AOC 7KLR User Manual

Problem
Power LED is not ON
No Plug & Play
Picture is fuzzy
Picture bounces or a
wave pattern is
present in the picture
Power LED is ON
(green or orange light
is ON) but there is no
video or picture.
Missing one of the
primary colors (RED,
GREEN, or BLUE)
Screen image is not
centered or sized
properly
Picture has color
defects (white doesn't
look white)
AOC 7KLR

Technical Support (FAQ)

• Make sure the power cord is properly connected to a grounded power outlet
and to the monitor.
• Confirm that your computer is Plug & Play compatible.
• Confirm that your video card is Plug & Play compatible.
• Inspect the video cable and make sure that none of the pins are bent.
• Make sure the AOC monitor drivers are installed
(AOC monitor drivers are available at: www.aocmonitor.com)
• Adjust the Contrast and Brightness settings.
• Move electrical devices away from the monitor. They may be causing electrical
interference.
• Press a key on the keyboard or wiggle the mouse to re-activate the monitor.
• Make sure the video cable is properly connected to the computer.
• Inspect the video cable and make sure none of the pins are bent.
• Make sure your computer is operating correctly by pressing the CAPS LOCK
key and observing whether the CAPS LOCK light turns ON or OFF.
• Inspect the video cable and make sure that none of the pins are bent.
• Make sure the video cable is properly connected to the computer.
• Adjust the Horizontal, Vertical or Zoom settings in the OSD window.
• Adjust the User Color setting in the OSD window.
Possible Solution
11
AOC 7KLR
v2_123102