Adjust Alternator Air Gap - Briggs & Stratton 110000 Service, Troubleshooting, And Repair Manual

Adjust Alternator Air Gap

1. Remove spark plug.
2. Loosen alternator screws (A, Figure 1-13).
and slide alternator (B) away from
flywheel.
3. Tighten one screw to secure alternator.
4. Line up flywheel magnet (D) with
1
alternator.
5. Insert Air Gap Gauge Tool #CE5121 (C)
between flywheel magnet and both legs of
alternator.
1
6. Loosen screw and allow magnet to pull
alternator against gauge.
7. Tighten fasteners and torque to values
listed in Section 12 - Engine
Specifications.
8. Rotate flywheel to remove gauge.
Figure 1 - 13
14