Using The Manual Gearbox; Containing Running Costs - Fiat 500 Abarth Owner's Handbook Manual

Hide thumbs Also See for 500 Abarth:
Table of Contents

Advertisement

USING THE MANUAL
GEARBOX
To engage the gears, press the clutch pe-
dal fully and shift the gear lever into one
of the required positions (the diagram is
shown on the knob fig. 2).
IMPORTANT Reverse may only be enga-
ged when the car is at a standstill. With
the engine running, wait for at least 2 se-
conds with the clutch pedal fully pressed
before engaging reverse to prevent da-
mage to the gears and grating.
In addition, to assist the transmission of the
drive torque, a limit on the engine revs du-
ring take off at 2700 rpm can be noticed.
When the clutch pedal is released and the
vehicle is being driven, the engine revs re-
striction is disabled.
To engage reverse gear R from neutral,
move the lever to the right and then
backwards.
IMPORTANT The clutch pedal must be
used for gear shift only. Never drive with
the foot resting, even if slightly, on the
clutch pedal. For versions/markets, whe-
re provided, the clutch pedal control elec-
tronics can intervene interpreting the
wrong drive style as a fault
82
A
fig. 2
Press the clutch pedal fully to
change gears correctly. For
this reason, there must be no
obstacles on the floor under
the pedals: ensure that rubber mats (if
any) are correctly positioned, not in-
terfering with the pedals.
WARNING
Do not drive with the hand
resting on the gear lever, be-
cause this pressure, even if light, over
time can wear gear inner compo-
nents.
CONTAINING
1
3
5
RUNNING COSTS
Here are some useful tips to save fuel and
2
4
R
minimize polluting emissions of CO
other pollutants (nitric oxide, unburnt hy-
drocarbons, fine dusts etc...).
GENERAL CONSIDERATIONS
F0S077Ab
Car maintenance
Have checks and adjustments carried out
in accordance with the "Service schedule".
Tyres
Check tyre pressure regularly at least on-
ce every four weeks: excessively low pres-
sure will increase consumption because
rolling resistance will be higher.
Unnecessary loads
Do not travel with an overloaded boot.
Do not travel with too much luggage
stowed in the boot. The weight of the car
(especially when driving in town) and its
trim greatly affect consumption and stabi-
lity.
and
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents