If A Fuse Blows - Fiat 500 Abarth Owner's Handbook Manual

fig. 36
❒ open the bulb cover B-fig. 36 and re-
place the snap-fitted bulb C;
❒ re-close the bulb cover B on the lens;
❒ reinstall the ceiling light properly in-
serting it into its seat on one side first,
and then pressing the other side until it
clicks into position.
116

IF A FUSE BLOWS

GENERALITIES fig. 37
The fuse is a protective device for the
electric system: it comes into action (i.e.
it cuts off) mainly due to a fault or im-
proper action on the system.
Check the efficiency of the corresponding
F0S109Ab
fuse when a device does not work: the
conducting element A must not be inter-
rupted. If it is, replace the blown fuse with
another with the same amperage (same
colour).
B intact fuse.
C fuse with damaged filament.
To identify the protection fuse, see the
tables in the following pages.
WARNING
Should the fuse blow again,
contact Abarth Dealership.
fig. 37
Never replace a blown fuse
with metal wires or other ma-
terials.
WARNING
Never replace a fuse with
another having higher am-
perage; FIRE HAZARD.
In case of general protection fuse in-
tervention (MEGA-FUSE, MIDI-FUSE,
MAXI-FUSE) contact Abarth Dealer-
ship.
Remove the key from the ignition
switch and switch off all loads before
replacing a fuse.
F0S110Ab