Removing The Leaf Digital Camera Back From The Camera Body - Leaf Aptus II Installation Manual

50
Connecting the FireWire Cable
For information about connecting the FireWire cable, see Working in
Tethered Mode, page 65.

Removing the Leaf Digital Camera Back from the Camera Body

Figure 48: Removing the Leaf AptusII digital camera back from a Mamiya RB
camera
1. Place the camera on a solid, steady surface.
2. If any of the following cables are connected, disconnect them:
•
FireWire cable
•
Camera-to-Back Sync cable
•
Flash Sync cable
3. Slide and push the Release button.
Release Button
4. Tilt the camera back away from the camera body to remove it.
Installation Procedures