Turning On The Leaf Aptus-Ii Digital Camera Back; Compact Flash Card And Battery - Leaf Aptus-II User Manual

8

Turning on the Leaf Aptus-II Digital Camera Back

Compact Flash Card and Battery

The procedure for turning on your Leaf Aptus-II digital camera back depends on
whether you use a compact flash card and battery, use a digital magazine, or work in
tethered mode.
To turn on your Leaf Aptus-II digital camera back when using a compact flash card and
battery:
1. Ensure that the battery is charged. For more information, see the Installation
Guide.
2. If this is the first time that you are using the compact flash card with your Leaf
Aptus-II digital camera back, you should format the card. For detailed
instructions on formatting the compact flash card, see Preparing a Compact
Flash Card for Shoot on page 10.
3. Insert the compact flash card. For more information, see Inserting a Compact
Flash Card on page 14.
4. Press and hold the On/Off button on the camera back until the orange light
turns on, and then release the On/Off button.
The light turns green and a beep sounds to indicate that the camera is ready for
you to shoot.
5. Verify that the
Ready to Shoot
Ready to Shoot
Chapter 2 – Getting Started
message appears on the touch screen.