Chain Dialling Operation - Toshiba TF 651 User Manual

Transmit documents
Broadcast with one touch

Chain dialling operation

Allows you to dial locations that may
require more than 38 digits. For example:
Long distance caariers and specialized
access lines. After you have stored the
number, you can transmit as follows.
Before you can this feature, you must
assign the number to be used for chain
dialing to a one-touch key.
The total sum of digits dialed (access +
number + ID) can not exceed 128 digits.
TF 651 TOSHIBA
STD
NORMAL
AUTO RX
RESIDUAL MEMORY 100%
STD NORMAL
AUTO RX
RESIDUAL MEMORY 100%
CHAIN DIAL
CHAIN DIAL
TEL NUMBER =(MAX128)
ABB. DIAL
ALPHABET
START
Load original
Remember:
Printed side face down
Document ready
Press one touch key
While documents are being read in:
Job number, current memory capacity
and corresponding page number are
displayed.
Load original
Remember:
Printed side face down
Document ready
Press CHAIN DIAL
Press the dialling numbers using a one-
touch key, abbreviated dialing number
(alphbet dial) and/or a dial keypad on the
operator control panel.
Make your choice
Confirm with START
While documents are being read in:
Job number, current memory capacity
and corresponding page number are
displayed.
35
Transmit documents
GB