5-3 DISASSEMBLY PROCEDURE
Step
Parts to remove
Drain the engine oill
1
Drain the fuel
2
OIL GAUGE
GASKET
Remarks and procedures
Remove a drain plug (M14 x 12mm) located on both
sides of the case.
Take care not to lose the gaskets.
* To discharge oil quickly, remove the oil guage(M22).
Shut (OFF) the fuel strainer.
Drain fuel from the carburetor drain.
FUEL STRAINER
Fig.5-3
- 13 -
GASKET
DRAIN PLUG
Fig.5-2
Fasteners
14 mm spanner
+ or - screwdriver