Advertisement
Here you can set the configuration for each of the PCL-849 cards
installed in the system. Set the IRQ, base address, baud rate, buffer
size and port number to match the card's configuration. Do this by
moving the highlight to the field you want to set up. Press ENTER
and a menu will appear, allowing you to select the correct setting. The
setup program also controls the port number assignments for each
card. When you use a driver function in your program, you will
identify the ports by these assignments. After you have set the IRQ,
base address, baudrate, buffer size and port assignments, press F10 to
save the settings or ESC to return to the previous page.
Note:
If any of your ports have the same setup, you can define them all at
one time by pressing F5 to bring up the Group Setup screen shown
below.
22
PCL-849 User's Manual
Make sure that the base address and IRQ selected
do not conflict with any other cards you may have
installed in your system.
Group Edit menu
Advertisement
