Advantech PCIE-1154 Startup Manual

PCIE-1154 4-port PCI Express USB Vision Frame
Grabber
Startup Manual
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
1. 1 x PCIE-1154, 4-port PCIe USB Vision Frame Grabber
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Specifications
General
• Chipset:
4 Fresco FL1100 host controllers
Compliant with USB 3.0 Specification Revision 1.0
Compliant with Intel® xHCI Specification Revision 1.0
• Interface:
PCIe 2.0 4x
• Data Transfer Rate:
SuperSpeed (5.0 Gbps); High Speed (480.0 Mbps); Full
Speed (12.0 Mbps); Low Speed (1.5 Mbps)
• Current Protection:
1500 mA per-port current limit
Note: For better compatibility, please change the
PCIe settings to Gen 2.0 on device card slot.
Mechanical and Environmental
• Dimensions (L x W):
118 x 111 mm (MB);
• Power Requirements:
Slot: PCIe 2.0 standard
• Net Weight:
100 g
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://support.advantech.com.tw/support/default.
aspx
This manual is for the PCIE-1154 Series Rev. A1
Part No. 2003115400
Printed in China
Connectors
Main Board Connectors
Label
USB1~USB4
Connector1
Connector2
Auxiliary Power Connector Pin-Out Assignment
Label
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1st Edition
March 2018
Function
USB3.0 Ports 1~4
PCIe 2x4-pin auxiliary power connector
ATX 5 & 12 V 4-pin power connector
Function
+12 V
+12 V
+12 V
N/C
Ground
N/C
Ground
Ground
Figure 1: Auxiliary Power Connector
PCIE-1154 Startup Manual 1