Denon DA-300USB Getting Started page 12

3
Checking audio output.
(Windows OS only)
• Outputs a TEST signal from the PC and checks the audio
output from the USB-DAC function.
q Select "Digital Audio Interface" and click "Properties".
• The Digital Audio Interface Properties window is
displayed.
Sound
Playback Recording
Sounds
Select a playback device below to modify its settings ：
Digital Audio Interface
Denon USB Audio
Default Device
Speakers
Ready
Configure
11
Communications
q
Set Default Properties
OK Cancel Apply
w Click the "Advanced" tab.
e Select the sampling rate and bit rate to be applied to the
D/A converter.
• It is recommended that "24 bit, 192000 Hz (Studio
Quality)" is selected.
r Click "Apply".
t Click "Test".
• Check that audio from this unit is output from the PC.
Digital Audio Interface Properties
General Supported Formats Levels
Default Format
Select the sample rate and bit depth to be used when running
in shared mode.
2 channel, 24 bit, 192000 H ｚ (Studio Quality)
2 channel, 24 bit, 44100 H ｚ (Studio Quality)
2 channel, 24 bit, 48000 H ｚ (Studio Quality)
2 channel, 24 bit, 96000 H ｚ (Studio Quality)
2 channel, 24 bit, 192000 H ｚ (Studio Quality)
Allow applications to take exclusive control of this device
Give exclusive mode applications priority
Restore Defaults
w
Advanced
t
Test
e
r
OK Cancel Apply