Function Of Changing Password; Set User Name Command - Ingolabs Pp1 User Manual

Gpstracker.net.in
Freedom is lost now...!
this parameter as the case may be.

8. Function of Changing Password

Send the SMS "#770# User new password # User old password ##" by
mobile phone to the terminal number, after successful sending, the mobile
phone with such setup will receive one piece of '&770&successful
setting&&' response information or '&770&PASSWORD ER&&' if the
password is wrong, as shown in the following picture:
① Send command to the terminal.
② The terminal return confirmation message to the mobile phone.

9. Set User name Command

SMS Command Format: #801#4~20-digit letters or numbers #4-digit
password ##
Example: #801#13900139000#0000##
Notes: After executing this command, the user name of the terminal on
GPRS mode is required to be set up according to actual demand. After the
setup is successful, the terminal will send reply with '&801&successful
19