Iii.charge The Battery - Ingolabs Pp1 User Manual

III. Charge the Battery
 Please use up the battery and discharge it for 2-3 times and then
charge the battery for at least 12 hours for initial use, in order to keep
the quality of the battery.
 The normal charging time of this product is 4-5 hours.
 Put the battery into the inside of the terminal and connect the charger
to 100V/220V AC power supply to charge the battery. Then the
power indicator on the upper right corner of the terminal screen will
keep strolling as showed in picture 3-1:
 When the battery is fully charged, the power indicator will stop
strolling; if the battery is charged on switch-off mode, the following
picture 3-2 indicates the charging is finished:
Gpstracker.net.in
Freedom is lost now...!
( picture 3-1 )
( picture 3-2 )
11