Setup Of Centre Number; Bi-Directional Call Function - Ingolabs Pp1 User Manual

Gpstracker.net.in
Freedom is lost now...!

2. Setup of Centre Number

Set the centre number by SMS through the mobile phone, after the setup
is successful, then the mobile phone that sending the SMS will receive
the "&710&successful setting&&" response message from the terminal.
Command format: #710# center number # user password ##
For example: #710#134xxxxxxxx#0000##
Note: All alarming information thereafter including SOS, low power,
electronic fence, etc will be returned to that number.

3. Bi-directional Call Function

Incoming calls can be rejected by pressing upper left button or received
15