Adjust Receiver Volume - Ingolabs Pp1 User Manual

Gpstracker.net.in
Freedom is lost now...!
by pressing middle right button.
Send the command in form of SMS to the terminal via mobile phone.
After the setup is successful, the mobile phone will receive the
"&710&successful setting&&" response message from the terminal.
Setup format: #711# Call1# Call2 # Call3 # 0000##
incoming call interface and call duration interface
Notes: After the setup is successful, press the upper right button for a
while, then the terminal will automatically dial the first phone number.
Press the bottom right button, then the terminal will automatically dial the
second phone number.

4. Adjust Receiver Volume

While making phone calls, the user could press upper or bottom right
button to adjust receiver volume.
16