Table of Contents
Advertisement
4
Common Fix
A
If Anity VIEW device or Anyty VIEW software were working OK but suddenly stops working properly,
Please try the following.
1
Close Anyty VIEW software and unplug receiver.
2
After waiting for 3 minutes, plug on receiver.
3
Power on the Microscope and re-open Anyty VIEW program.
B
After PC resume from standby or hibernate
Anyty VIEW might not work properly, please close it and re-open to try.
C If it does not work even if you connect a microscope and re-start Anyty VIEW, please uninstall Anyty
VIEW once, and install Anyty VIEW once again and try.
D When there is wireless LAN or Bluetooth in the environment using the microscope, it may have an
influence on operation of the microscope.
E
When you could not operate an LCD monitor in TV model, please push the reset button of the backside
with a former thin thing and switch it on again
F
Please try the following operation to confirm the number of the bits of the system by Windows7
and Vista
Please right click the 'Computer' and click 'Property'
Please look at 'System Option' in 'System'.
G
Please follow the steps to install codec for saving animation.
Insert a software CD into CD-ROM of the PC and open 'My Computer' of the start button. Next, right
click the CD-ROM and choose 'Open'. Then find 'Autorun.exe' to activate install program.
Install the software according to the instructions of the screen. After installation is complete,
'MJPG_MainConcept Video V3.2.4' will be available in the column of 'codec'.
49
Hide quick links:
Advertisement
Table of Contents
