T1 How To Charge Anyty Digital Microscope And Lcd Monitor - 3R Anyty Operating Instruction

T1 Charging Anyty Microscope and LCD Monitor
Before using Microscope, please charge battery of Microscope.
Connect attached charging cable to charging connector on Microscope.
Connect other side of cable to USB port on PC or AC/USB transform adaptor.
During charging period, dial switch flashes blue
Charging period will be approx 3 hours. Maximum 5 hours of working time in full power condition.
Attention USB charging cable is specialized to Microscope. Please DO NOT use it for charging LCD monitor.
It could be the cause of breakdown or heating.
Dial switch
Turn it right until it sounds 'click' and the power will be on.
Charging
Charging complete
Low power
Blue flash
Blue light
Red light
Charging connector
32